LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> Rear Wheel House Plate >> Removal [07/2020 - ] >> Procedure

Removal [07/2020 - ]: Procedure

  1. REMOVE REAR WHEEL HOUSE FRONT PLATE 
    1. Remove the screw.
      GTY1013531Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Screw
      *b Clip
      Remove in this Direction
    2. Remove the clip.
    3. Disengage the claw to remove the rear wheel house front plate as shown in the illustration.
scientia non olet · About LEMON Manuals