LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (1 Of 2) >> Roof Rack >> Disassembly [07/2020 - ] >> Procedure

Disassembly [07/2020 - ]: Procedure

  1. REMOVE NO. 3 ROOF CARRIER SEAL 
    1. For Front Side:
      1. Remove the 2 nuts.
        GTY1013950Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Remove the 2 No. 3 roof carrier seals.
        GTY1013940Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. For Rear Side:
      1. Remove the 2 nuts.
        GTY1013930Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Remove the 2 No. 3 roof carrier seals.
        GTY1013921Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals