LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (1 Of 2) >> Grille Shutter >> Disassembly [07/2020 - ] >> Procedure

Disassembly [07/2020 - ]: Procedure

  1. REMOVE EXTENSION WIRE ASSEMBLY 
    1. Disengage the clamp.
      GTY1013907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector to remove the extension wire assembly.
  2. REMOVE NO. 1 RADIATOR GRILLE SEAL 
    1. Remove the No. 1 radiator grille seal.
      GTY1013899Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE NO. 2 RADIATOR GRILLE SEAL 
    1. Remove the No. 2 radiator grille seal.
      GTY1014722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals