Check Point
- When DTC B1321-87 is output from the combination meter assembly, other ECUs on the same detection circuit may simultaneously output the same DTC depending on the malfunctioning area.
- Depending on the combination of DTCs simultaneously output by each ECU, the malfunctioning area can be narrowed down. Refer to the following table for DTC combinations output by each ECU.
W/ HEADUP DISPLAY SYSTEM:
| DTC Output Pattern | DTC Output Part Name (Display on GTS) |
Malfunction Status/Suspected Area | ||
|---|---|---|---|---|
| Combination Meter Assembly (Combination Meter) |
Radio Receiver Assembly*1 Radio and Display Receiver Assembly*2 (Navigation System) |
Meter Mirror Sub-assembly (Headup Display) |
||
| 1 | B1321-87 | B1324 B1325 |
B1321-87 | Short in the Circuit
Open in the Circuit
|
| 2 | B1321-87 | B1324 | Not output |
|
| 3 | B1321-87 | Not output | B1321-87 |
|
| 4 | B1321-87 | Not output | Not output | Combination meter assembly |
- *1: w/ Navigation System
- *2: w/o Navigation System
W/O HEADUP DISPLAY SYSTEM:
| DTC Output Pattern | DTC Output Part Name (Display on GTS) |
Suspected Area | |
|---|---|---|---|
| Combination Meter Assembly (Combination Meter) |
Radio Receiver Assembly*1 Radio and Display Receiver Assembly*2 (Navigation System) |
||
| 1 | B1321-87 | B1324 |
|
| 2 | B1321-87 | Not output |
|
- *1: w/ Navigation System
- *2: w/o Navigation System