LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column System - Service Information >> Steering Pad Switch >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 3 guides and 4 claws to install the steering pad switch assembly.
    2. Install the 2 screws.
    3. Connect the steering pad switch connector to the steering wheel assembly.
  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [07/2020 - ]

scientia non olet · About LEMON Manuals