LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System - Service Information >> Front Passenger Airbag Assembly >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY 
    1. Engage the 3 hooks.
      GTY813686Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Push in the instrument panel passenger airbag assembly to engage the 3 hooks.
    3. Install the instrument panel passenger airbag assembly with the 2 screws.
      GTY835729Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 INSTRUMENT PANEL WIRE 
    1. Connect the 2 airbag connectors of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.
      GTY1009591Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • When connecting any airbag connector, take care not to damage the airbag wire harness.
      • Be sure to only connect the connectors to each corresponding color.

      HINT: 

      Refer to How to Connect or Disconnect Airbag Connector.

      Refer to HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR [07/2020 - 10/2022] , or refer to HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR [10/2022 - ]

    2. Connect the No. 2 instrument panel wire to the wire harness clamp.
    3. Engage the clamp.
  3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to INSTALLATION [07/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

scientia non olet · About LEMON Manuals