Caution / Notice / Hint
NOTE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Refer to BEFORE DISCONNECTING BATTERY [07/2020 - 10/2022] , or refer to BEFORE DISCONNECTING BATTERY [10/2022 - ]
- When disconnecting and reconnecting the auxiliary battery.
Refer to WORK PROCEDURE [07/2020 - 10/2022] , or refer to WORK PROCEDURE [10/2022 - ]
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
- After replacing the airbag sensor assembly, refer to work procedure.
Refer to WORK PROCEDURE [07/2020 - 12/2021] , or refer to WORK PROCEDURE [12/2021 - 10/2022] , or refer to WORK PROCEDURE [10/2022 - ]
HINT:
- To perform the simulation method, enter check mode (signal check) with the GTS.
Refer to CHECK MODE PROCEDURE [07/2020 - ]
- Perform the simulation method while checking the Data List.
Refer to DATA LIST / ACTIVE TEST [07/2020 - 12/2021] , or refer to DATA LIST / ACTIVE TEST [12/2021 - ]