DTC P33DA-1E: Hybrid/EV Battery Stack 1 Circuit Resistance Out of Range; DTC P33DB-1E: Hybrid/EV Battery Stack 2 Circuit Resistance Out of Range [07/2020 - ]: Description

The HV battery is composed of 70 cells (3.6 V each) in series. The battery ECU assembly monitors the internal resistance of each HV battery cell to detect malfunctions of the HV battery.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Warning Indicate
P33DA-1E	Hybrid/EV Battery Stack 1 Circuit Resistance Out of Range	The difference in internal resistance of each cell of the No. 1 HV supply stack sub-assembly exceeds the threshold. (1 trip detection logic)	No. 1 HV supply stack sub-assembly Hybrid battery terminal block	Comes on	Master Warning: Comes on
P33DB-1E	Hybrid/EV Battery Stack 2 Circuit Resistance Out of Range	The difference in internal resistance of each cell of the No. 2 HV supply stack sub-assembly exceeds the threshold. (1 trip detection logic)	No. 2 HV supply stack sub-assembly Hybrid battery terminal block	Comes on	Master Warning: Comes on

RELATED DATA LIST

DTC No.	Data List
P33DA-1E	Hybrid/EV Battery Cell 1 to 70 Internal Resistance
P33DB-1E	Hybrid/EV Battery Cell 1 to 70 Internal Resistance

The following items can be helpful when performing repairs:

Data List

Hybrid/EV Battery Cell 1 to 70 Voltage
Hybrid/EV Battery SOC
Hybrid/EV Battery Voltage
Hybrid/EV Battery Current
Hybrid/EV Battery Temperature 1 to 6

HINT:

These DTCs can be stored after clearing DTCs and driving the vehicle for approximately 10 minutes.
In order to ensure HV battery performance, appropriate cooling performance must be maintained. Perform the following items as necessary. If cooling performance has decreased and "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, make sure to perform the following items:
- Make sure the air intake port for HV battery is not blocked.
- Make sure there are no gaps between the connecting parts of the ducts.
- Clean the No. 1 HV battery intake filter.
  1. Clear the DTCs to reset the learning values even if no DTCs are stored.