LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pump >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 6 [10/2022 - ]

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 7 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 7 [10/2022 - ]

  3. INSTALL OIL PUMP ASSEMBLY 
    1. Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.

      Torque: 24 N*m (245 kgf*cm, 18 ft.*lbf) 

  4. INSTALL OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 9 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - ]

  5. INSTALL ENGINE OIL LEVEL SENSOR 

    See step  1

  6. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 11 [10/2022 - ]

  7. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 12 [10/2022 - ]

  8. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [07/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

scientia non olet · About LEMON Manuals