LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System - Service Information >> PCV Valve >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. Apply a light coat of engine oil to the O-ring.
      NOTE:

      When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.

    2. Install the PCV valve (ventilation valve sub-assembly) to the cylinder head sub-assembly.
  2. INSTALL INTAKE MANIFOLD 

    Refer to INSTALLATION [07/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

scientia non olet · About LEMON Manuals