LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Body & Frame >> Windows >> Window / Glass - Service Information >> Light Control Inverter >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. REMOVE REAR NO. 2 FLOOR BOARD 

    Refer to PROCEDURE - Step 4

  2. REMOVE BATTERY HOLE COVER 

    Refer to PROCEDURE - Step 6

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL 

    Refer to PROCEDURE - Step 4

  4. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 

    Refer to REMOVAL [07/2020 - ]

  5. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET 
    1. Disconnect the 4 connectors and disengage the 2 clamps.
      GTY1115593Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and No. 2 console box mounting bracket.
  6. REMOVE NO. 2 VOLTAGE INVERTER ASSEMBLY 
    1. Remove the 4 bolts.
      GTY1115592Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and No. 2 voltage inverter assembly.
scientia non olet · About LEMON Manuals