LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Antenna >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL NAVIGATION ANTENNA BRACKET 
  2. INSTALL NAVIGATION ANTENNA ASSEMBLY 
    1. Engage the 6 guides and 2 claws to install the navigation antenna assembly as shown in the illustration.
      GTY990181Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/o Manual (SOS) Switch *B w/ Manual (SOS) Switch
      Install in this Direction - -
  3. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET 
    1. Engage the 2 guides.
    2. Install the navigation antenna assembly with bracket with the 2 screws.
    3. Engage the 2 claws.
    4. Connect the connector.
  4. INSTALL DEFROSTER NOZZLE ASSEMBLY 

    Refer to PROCEDURE - Step 11

  5. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to INSTALLATION [07/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

scientia non olet · About LEMON Manuals