LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information >> Rear Turn Signal Light Assembly >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL REAR TURN SIGNAL LIGHT ASSEMBLY 
    1. Engage the 10 guides to temporarily install the rear turn signal light assembly.
    2. Install the rear turn signal light assembly with the 3 screws.
    3. Connect the 2 connectors.
    4. Engage each clamp.
  2. INSTALL REAR BUMPER ASSEMBLY 

    Refer to INSTALLATION [07/2020 - ]

scientia non olet · About LEMON Manuals