LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information >> Rear Light Assembly >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL REAR LIGHT ASSEMBLY 
    1. Engage the 2 clips.
    2. Install the rear light assembly with the 3 nuts.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

  2. INSTALL NO. 2 LIGHT WIRE 
    1. Connect the 2 connectors.
    2. Engage the 5 clamps to install the No. 2 light wire.
  3. INSTALL SYMBOL EMBLEM 

    Refer to PROCEDURE - Step 8

  4. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY WITH LIGHT 

    Refer to INSTALLATION [07/2020 - ]

scientia non olet · About LEMON Manuals