Steering Pad Switch Circuit [07/2020 - ]: Procedure
- PERFORM ACTIVE TEST USING GTS
- Perform the Active Test according to the display on the GTS.
Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Multi Switch (Up) Performs the same operation as pressing the up switch on steering pad switch OFF or ON - Multi Switch (Down) Performs the same operation as pressing the down switch on steering pad switch OFF or ON - Multi Switch (Left) Performs the same operation as pressing the left switch on steering pad switch OFF or ON - Multi Switch (Right) Performs the same operation as pressing the right switch on steering pad switch OFF or ON - Multi Switch (Enter) Performs the same operation as pressing the OK switch on steering pad switch OFF or ON - Multi Switch (Back) Performs the same operation as pressing the back switch on steering pad switch OFF or ON - Body Electrical > Combination Meter > Active Test
Tester Display Multi Switch (Up) Body Electrical > Combination Meter > Active Test
Tester Display Multi Switch (Down) Body Electrical > Combination Meter > Active Test
Tester Display Multi Switch (Left) Body Electrical > Combination Meter > Active Test
Tester Display Multi Switch (Right) Body Electrical > Combination Meter > Active Test
Tester Display Multi Switch (Enter) Body Electrical > Combination Meter > Active Test
Tester Display Multi Switch (Back) Result
Result Proceed to Active Test can be performed correctly A Active Test cannot be performed correctly B
Result:
B
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [07/2020 - 10/2022] , or refer to REMOVAL [10/2022 - ]
Result:
A
See step 2
- Perform the Active Test according to the display on the GTS.
- READ VALUE USING GTS
- Read the Data List according to the display on the GTS.
Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Multi Switch (Up) Up switch on steering pad switch operation OFF or ON OFF: Switch released
ON: Switch pushed- Multi Switch (Down) Down switch on steering pad switch operation OFF or ON OFF: Switch released
ON: Switch pushed- Multi Switch (Left) Left switch on steering pad switch operation OFF or ON OFF: Switch released
ON: Switch pushed- Multi Switch (Right) Right switch on steering pad switch operation OFF or ON OFF: Switch released
ON: Switch pushed- Multi Switch (Enter) OK switch on steering pad switch operation OFF or ON OFF: Switch released
ON: Switch pushed- Multi Switch (Back) Back switch on steering pad switch operation OFF or ON OFF: Switch released
ON: Switch pushed- Body Electrical > Combination Meter > Data List
Tester Display Multi Switch (Up) Multi Switch (Down) Multi Switch (Left) Multi Switch (Right) Multi Switch (Enter) Multi Switch (Back) Result
Result Proceed to The value of the Data List item is correct, and the combination meter assembly operates correctly A The value of the Data List item is correct, but the combination meter assembly does not operate correctly B The Data List item changes correctly C
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2020 - ]
Result:
B
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [07/2020 - 10/2022] , or refer to REMOVAL [10/2022 - ]
Result:
C
See step 3
- Read the Data List according to the display on the GTS.
- INSPECT STEERING PAD SWITCH ASSEMBLY
Refer to INSPECTION [07/2020 - ]
Result
Proceed to OK NG Result:
OK
REPLACE STEERING VIBRATION ECU. Refer to REMOVAL [07/2020 - 10/2022] , or refer to REMOVAL [10/2022 - ]
Result:
NG
REPLACE STEERING PAD SWITCH ASSEMBLY. Refer to REMOVAL [07/2020 - 10/2022] , or refer to REMOVAL [10/2022 - ]