Caution / Notice / Hint
NOTE:
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- When replacing of the following ECUs, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [07/2020 - ]
- Combination meter assembly
- No. 2 skid control ECU (brake actuator assembly)
- Before starting the following inspection, check that the tire size and tire pressures are as specified.
Refer to INSPECTION [07/2020 - ]