LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Supra Premium >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension System (Front) - Service Information >> Front Suspension Member Lower Protector >> Removal [03/2019 - ] >> Procedure

Removal [03/2019 - ]: Procedure

  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 
    1. Remove screws (arrows).
      GTY946249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the No. 1 engine under cover assembly (1).
  2. REMOVE FRONT FENDER SPLASH FRONT SHIELD LH 
    1. Remove screws (arrows).
      GTY1159777Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Feed out the front fender splash front shield LH (1) to the side and remove.
  3. REMOVE FRONT FENDER SPLASH FRONT SHIELD RH 

    HINT: 

    Use the same procedure as for the LH side.

  4. REMOVE FRONT FLOOR COVER 
    1. Remove screws (arrows).
      GTY946250Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the front floor cover (1).
  5. REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR 
    1. Remove screws (arrows).
      GTY946257Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen the 16 mm bolts (2).
    3. Remove the front suspension member lower protector (1).
scientia non olet · About LEMON Manuals