LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Supra Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Intake / Exhaust System (B46) - Service Information) >> Air Cleaner Assembly >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL AIR CLEANER ASSEMBLY 
    1. Check the rubber mount for correct fit.
      GTY946296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Feed the air cleaner in and engage it in the rubber mounts (marks).
    3. Connect connectors and lock.

      HINT: 

      • The connector must engage audibly.
      • Note the installation position of the component. The component may be installed in various installation positions.
    4. Tighten clamp.

      Torque: 3.0 N.m (31 kgf/cm, 27 in.lbf) 

scientia non olet · About LEMON Manuals