Installation [03/2020 - ]: Procedure

1. Replace the O-ring (1).

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Check the sealing ring (2) on the coolant return line (3) for damage and if required, renew the coolant return line (3).
3. Position the No. 2 turbo water pipe sub-assembly (2).
4. Tighten down the screw.

   Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

Refer to INSTALLATION [03/2020 - ]