LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Supra Premium >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake / Exhaust System (B58) - Service Information >> TURBO WATER PIPE (for Outlet Side) >> Installation [03/2019 - 03/2020] >> Procedure

Installation [03/2019 - 03/2020]: Procedure

  1. INSTALL NO. 2 TURBO WATER PIPE SUB-ASSEMBLY 
    1. Replace the O-ring (1).
      GTY946063Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Position the No. 2 turbo water pipe sub-assembly.
    3. Tighten down the T30 bolt.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

  2. INSTALL TURBOCHARGER SUB-ASSEMBLY 

    Refer to INSTALLATION [03/2019 - 03/2020] 

scientia non olet · About LEMON Manuals