LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Sequoia TRD Pro >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Interior) (Service Information) >> Luggage Compartment Room Light >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE NO. 2 ROOM LIGHT ASSEMBLY 
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the lens.
      GTY539131Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws.
    3. Disconnect the connector and then remove the No. 2 room light assembly.
scientia non olet · About LEMON Manuals