LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Sequoia TRD Pro >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Light Control Rheostat >> Removal [08/2015 - 08/2017] >> Procedure

Removal [08/2015 - 08/2017]: Procedure

  1. REMOVE FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 12

  2. REMOVE COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 14

  3. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 15

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 17

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 26

  6. REMOVE LIGHT CONTROL RHEOSTAT 
    1. Disengage the 2 claws and remove the light control rheostat.
      GTY595155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals