Removal [11/2018 - ]: Procedure

Refer to PROCEDURE - Step 8 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 8 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 8 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 8 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 8 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 8 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 8 [10/2023 - ]

1. Using a moulding remover A, detach the claw and remove the rear power window regulator switch assembly from the rear door armrest base panel LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002