Removal [11/2018 - ]: Procedure

HINT: 

Pull back the front door opening trim weatherstrip LH so that the front pillar garnish LH can be removed.

Refer to PROCEDURE - Step 18 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 18 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 18 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 19 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 19 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 19 [10/2022 - ]

Refer to PROCEDURE - Step 30 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 30 [02/2019 - 08/2020] , or refer to PROCEDURE - Step 30 [08/2020 - 10/2023] , or refer to PROCEDURE - Step 31 [10/2023 - ]

Refer to PROCEDURE - Step 26 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 26 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 26 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 27 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 27 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 27 [10/2022 - ]

1. Remove the 2 screws and front No. 2 speaker assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *A

   for 6 Speakers

   *B

   for 9 Speakers

2. Disconnect the connector.