DTC C05C0-51: Brake Pedal Position Sensor "A" Not Programmed [10/2023 - ]: Description
Refer to DTC C05C0-00.
Refer to DTC C05C0-00: Brake Pedal Position Sensor "A" [10/2023 - ]
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C05C0-51 | Brake Pedal Position Sensor "A" Not Programmed | The brake pedal stroke sensor assembly zero point calibration is not performed. (Normal brake pedal stroke sensor assembly zero point not memorized.) |
|
Does not come on | Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly) HINT: During Dealer Mode, related DTCs are cleared. |