Caution / Notice / Hint
NOTE:
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- Before replacing the main body ECU (multiplex network body ECU), refer to smart key system (for Start Function).
For HV Model:
Refer to REGISTRATION [12/2021 - ]
For Gasoline Model:
Refer to REGISTRATION [12/2021 - ]
HINT:
- The meter illumination dims when the taillights are turned on.
- Setting the meter illumination level to maximum brightness cancels the above dimming of the meter illumination.
- Setting the meter illumination level to minimum brightness turns off the meter illumination.
- The automatic light control sensor sensitivity can be customized.
Refer to CUSTOMIZE PARAMETERS [11/2024 - ]