LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction (4 Of 4) >> Meter / Gauge System >> DTC Check / Clear [11/2018 - ] >> DTC Check / Clear [11/2018 - ]

DTC Check / Clear [11/2018 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

      Body Electrical > Combination Meter > Trouble Codes 

    5. Check for DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Clear DTCs.

      Body Electrical > Combination Meter > Clear DTCs 

    5. Clear the DTCs.