Removal [10/2022 - ]: Procedure

REMOVE FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 16
REMOVE COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 17
REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 18
REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for Gasoline Model)
Refer to PROCEDURE - Step 22
REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 22
REMOVE FUSE BOX OPENING COVER
Refer to PROCEDURE - Step 23

REMOVE TRIP SWITCH

Using a thin-bladed screwdriver, detach the claw and remove the trip switch in the direction indicated by the arrow shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Remove in this Direction
	Protective Tape

HINT:

Tape the thin-bladed screwdriver tip before use.