Removal [06/2020 - ]: Procedure
- REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 23 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 23 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 23 [10/2022 - ]
- REMOVE IGNITION COIL ASSEMBLY
Refer to PROCEDURE - Step 2
- REMOVE SPARK PLUG
- Remove the 4 spark plugs from the cylinder head sub-assembly.NOTE:
If a spark plug has been struck or dropped, replace it.
- Remove the 4 spark plugs from the cylinder head sub-assembly.