LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> RAV4 Prime SE >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge / Display - Service Information (PHEV) >> Combination Meter >> Removal [06/2020 - 10/2022] >> Procedure

Removal [06/2020 - 10/2022]: Procedure

  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 8 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 8 [12/2021 - 10/2022]

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 9 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 9 [12/2021 - 10/2022]

  3. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 4 screws.
      GTY937132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY868413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction

      Pull towards the rear of the vehicle to detach the clip and guide and remove the combination meter assembly.

    3. Detach the clamp and disconnect the 2 connectors.
      GTY986435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals