Removal [06/2020 - ]: Procedure

REMOVE QUARTER WINDOW UPPER MOULDING LH

HINT:

When removing the quarter window upper moulding LH, if the double-sided tape is difficult to remove, heat the vehicle body and quarter window upper moulding LH using a heat light.

Standard

Item	Temperature
Vehicle Body	40 to 60°C (104 to 140°F)
Quarter Window Upper Moulding LH	20 to 30°C (68 to 86°F)

WARNING:

Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

NOTE:

Do not heat the vehicle body and quarter window upper moulding LH excessively.

Put protective tape around the quarter window upper moulding LH.

*a	Double-sided Tape
	Remove in this Direction
	Protective Tape

Detach the clip and double-sided tape to remove the quarter window upper moulding LH as shown in the illustration.
NOTE:
The quarter window upper moulding LH must not be reused.