Removal [06/2020 - ]: Procedure
- REMOVE REAR DOOR NO. 5 WEATHERSTRIP LH
Refer to PROCEDURE - Step 41 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 41 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 41 [10/2022 - ]
- REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH
- Remove the clip.
- Put protective tape around the rear door lower outside moulding sub-assembly LH.
Protective Tape - Remove the hole plug.
- Remove the nut.
- Detach the clip and remove the rear door lower outside moulding sub-assembly LH as shown in the illustration.
Place Hand Here Remove in this Direction
- Remove the clip.
- REMOVE OUTSIDE MOULDING SET LH
- REMOVE NO. 2 ACCESS PANEL WEATHERSTRIP LH
- REMOVE REAR DOOR PANEL PROTECTOR LH