LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> RAV4 Prime SE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Monitor System - Service Information (PHEV) >> TELEVISION CAMERA (for Front) >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. REMOVE HOOD LOCK ASSEMBLY 

    Refer to PROCEDURE - Step 1 [06/2020 - 10/2023] , or refer to PROCEDURE - Step 1 [10/2023 - 11/2024] , or refer to PROCEDURE - Step 1 [11/2024 - ]

  2. REMOVE UPPER RADIATOR AIR GUIDE PLATE 
    1. Remove the 4 bolts.
      GTY1009075Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Bolt
      Clip
    2. Remove the 5 clips.
    3. Place both hands at the position shown in the illustration and pull in the direction.
      GTY1009720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hands Here
      Pull in this Direction
    4. Pull in the direction and remove the radiator upper air guide plate.
      GTY1009135Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  3. REMOVE FRONT TELEVISION CAMERA ASSEMBLY 
    1. Disconnect the connector.
      GTY1111174Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws.
      GTY1111175Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Detach the guide and remove the front television camera assembly.
scientia non olet · About LEMON Manuals