Customize Parameters [06/2020 - ]
- CUSTOMIZE METER / GAUGE SYSTEM
- Customizing with the GTSNOTE:
Be sure to record the current value before customizing.
Warning
Tester Display Description Default Setting ECU Lane Change Flashing Times Adjust Function to change the lane change flashing time 3 $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 Combination meter assembly Flasher Sound Volume Adjust Function to change the flasher sound volume Medium $02:Large,$00:Medium,$01:Small Combination meter assembly Display
Tester Display Description Default Setting ECU ODO Display Time After IG OFF Adjust Function to change the ODO display time after the ignition switch is turned off 30s $00:30s,$01:60s,$02:600s,$03:OFF Combination meter assembly ECO Drive Indicator Zone Display Function (Meter) Function to change the ECO drive indicator zone display ON $00:OFF,$01:ON Combination meter assembly - Customizing with the combination meter assemblySETTINGS
Tester Display Description Default Setting ECU Language Function to change the language on the display English English*1 Combination meter assembly Units Function to change the units on the display - miles (MPG US, miles/kWh)*2
- km (L/100km, kWh/100km)*2
km (km/L, km/kWh), km (L/100km, kWh/100km), miles (MPG US, miles/kWh), miles (MPG UK, miles/kWh) Combination meter assembly Meter Type Function to change the Meter Type on the display Analog Digital, Analog, Digital+ Combination meter assembly *1: Available languages may differ depending on the target region.
*2: Available units may differ depending on the target region.
- Customizing with the GTS