Removal [08/2020 - 12/2021]: Procedure

• for 2WD:

  Refer to REMOVAL [08/2020 - 12/2021]

• for HV Model AWD:

  Refer to REMOVAL [08/2020 - 12/2021] 

• for Gasoline Model AWD:

  Refer to REMOVAL [08/2020 - 10/2022]

1. Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.
   NOTE:

   Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Perform the same procedure as for the LH side.