Removal [11/2018 - ]: Procedure

REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
Refer to PROCEDURE - Step 8 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 8 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 8 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 8 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 8 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 8 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 8 [10/2023 - ]

REMOVE OUTER MIRROR SWITCH ASSEMBLY

Using a thin-bladed screwdriver, detach the claw and remove the outer mirror switch assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Remove in this Direction
	Protective Tape

HINT:

Tape the thin-bladed screwdriver tip before use.