DTC Check / Clear [02/2019 - 12/2021]

CHECK DTC AND FREEZE FRAME DATA
1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON and the Techstream on.
4. Enter the following menus: Chassis / Electric Parking Brake / Trouble Codes.
5. Check for DTC.
  Chassis > Electric Parking Brake > Trouble Codes
6. Check the freeze frame data.
  1. When a DTC which has freeze frame data is output, check the freeze frame data and read the vehicle status when the DTC was stored.
    HINT:
    
    for Freeze Frame Data: Refer to FREEZE FRAME DATA [02/2019 - 12/2021]
CLEAR DTC AND FREEZE FRAME DATA
1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON and the Techstream on.
4. Enter the following menus: Chassis / Electric Parking Brake / Trouble Codes.
5. Clear DTCs.
  Chassis > Electric Parking Brake > Clear DTCs
  
  HINT:
  
  If a DTC is cleared, the freeze frame data will also be cleared.