Inspection [11/2018 - 12/2021]: Procedure
- INSPECT BRAKE BOOSTER PUMP ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Brake Booster Pump Assembly)Standard Resistance
Tester Connection Condition Specified Condition 2 (BM1) - 4 (GND1) Always 10 Ω or less 1 (BM2) - 3 (GND2) Always 10 Ω or less 2 (BM1) - 1 (BM2) Always Below 1 Ω 4 (GND1) - 3 (GND2) Always Below 1 Ω
- Measure the resistance according to the value(s) in the table below.