Hybrid System Indicator Malfunction [08/2020 - ]: Procedure

1. Check if CAN communication DTCs are output.

   Refer to DIAGNOSIS SYSTEM [08/2020 - 12/2021] , or refer to DIAGNOSIS SYSTEM [12/2021 - 10/2022] , or refer to DIAGNOSIS SYSTEM [10/2022 - 10/2023] , or refer to DIAGNOSIS SYSTEM [10/2023 - 11/2024] , or refer to DIAGNOSIS SYSTEM [11/2024 - ]

   Result

   Result	Proceed to
   CAN communication DTCs are not output.	A
   CAN communication DTCs are output.	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM 

Refer to DIAGNOSIS SYSTEM [08/2020 - 12/2021] , or refer to DIAGNOSIS SYSTEM [12/2021 - 10/2022] , or refer to DIAGNOSIS SYSTEM [10/2022 - 10/2023] , or refer to DIAGNOSIS SYSTEM [10/2023 - 11/2024] , or refer to DIAGNOSIS SYSTEM [11/2024 - ]

Result: 

A 

See step  2

1. Check if hybrid control system DTCs are output.

   for AWD with NICKEL METAL HYDRIDE BATTERY:

   Refer to DTC CHECK / CLEAR [02/2019 - 10/2022] , or refer to DTC CHECK / CLEAR [10/2022 - ]

   for LITHIUM-ION BATTERY:

   Refer to DTC CHECK / CLEAR [06/2020 - 10/2022] , or refer to DTC CHECK / CLEAR [10/2022 - ]

   Powertrain > Hybrid Control > Trouble Codes 

   Result

   Result	Proceed to
   Hybrid control system DTCs are not output.	A
   Hybrid control system DTC is output.	B

Result: 

B 

GO TO HYBRID CONTROL SYSTEM 

for AWD with NICKEL METAL HYDRIDE BATTERY:

Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2020 - 12/2021] , or refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - 11/2024] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2024 - ]

for LITHIUM-ION BATTERY:

Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2020 - 12/2021] , or refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - 11/2024] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2024 - ]

Result: 

A 

See step  3

1. Using the Techstream, perform the Active Test.

   Refer to DATA LIST / ACTIVE TEST [08/2020 - 10/2022] , or refer to DATA LIST / ACTIVE TEST [10/2022 - ]

   Body Electrical > Combination Meter > Data List 

   Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
   HV/EV System Indicator	Hybrid system indicator value	Min.: -101%, Max.:511% or Unset	Current hybrid system indicator value	"Unset" is displayed when the vehicle is stopped and the power switch is ON (READY).

   Body Electrical > Combination Meter > Data List 

   Tester Display
   HV/EV System Indicator

   OK

   Hybrid system indicator value displayed on the Techstream is almost the same as the hybrid system indicator indication.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE HYBRID VEHICLE CONTROL ECU 

Refer to REMOVAL [08/2020 - 12/2021] , or refer to REMOVAL [12/2021 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ]

Result: 

NG 

REPLACE COMBINATION METER ASSEMBLY 

Refer to REMOVAL [11/2018 - 10/2022] , or refer to REMOVAL [10/2022 - ]