DTC C124A-05: ECM Communication System Programming Failure [12/2021 - ]: Description
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C124A-05 | ECM Communication System Programming Failure | When the vehicle speed is 40 km/h (25 mph) or more, one of the following conditions is met:
|
|
Comes on |
|
C124A-05 DTC DETECTION CONDITIONS
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | When the vehicle speed is 40 km/h (25 mph) or more | ◦ | ◦ |
| Malfunction Status | The engine type, powertrain variation and destination information sent from the hybrid vehicle control ECU do not match the information stored in the No. 2 skid control ECU (brake actuator assembly) | ◦ | - |
| No system information stored in the No. 2 skid control ECU (brake actuator assembly) | - | ◦ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.