LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> RAV4 LE, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (W/O Vacuum Brake Booster) - Diagnostic Codes (3 Of 8) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster) >> DTC C1240-00: Yaw Rate Sensor / Multi-axis Acceleration Sensor Module "A" [12/2021 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • After replacing or reinstalling the yaw rate and acceleration sensor (airbag ECU assembly), perform "Calibration" after performing "Reset Memory".

    Refer to UTILITY [12/2021 - ]

  • After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration" after performing "Reset Memory".

    Refer to UTILITY [12/2021 - ]