Caution / Notice / Hint
NOTE:
- When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.
Refer to UTILITY [02/2019 - 12/2021]
- When replacing the yaw rate and acceleration sensor (airbag ECU assembly), perform zero point calibration.
Refer to UTILITY [02/2019 - 12/2021]
- Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU).
If the main body ECU (multiplex network body ECU) is replaced, refer to Registration.
Refer to REGISTRATION [11/2018 - 10/2019] , or refer to REGISTRATION [10/2019 - 12/2021]