Caution / Notice / Hint

NOTE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
The following troubleshooting procedure is based on the assumption that the SFI system is normal. Confirm that the SFI system is not malfunctioning before performing the following procedure.
For A25A-FKS with Canister Pump Module:

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 08/2020]

For A25A-FKS without Canister Pump Module:

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 08/2020]

For A25A-FXS:

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 08/2020]