Removal [11/2018 - 10/2022]: Procedure

Refer to PROCEDURE - Step 10 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 10 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 10 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 11 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 11 [12/2021 - 10/2022]

Refer to PROCEDURE - Step 11 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 11 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 11 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 12 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 12 [12/2021 - 10/2022]

1. Remove the 4 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   Pull towards the rear of the vehicle to detach the clip and guide and remove the combination meter assembly.

3. Detach the clamp and disconnect the 2 connectors.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *A	for 4.2 Inch Display
   *B	for 7 Inch Display