Installation [11/2018 - ]: Procedure

INSTALL SEAT MEMORY SWITCH

Attach the claw to install the seat memory switch.

INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 43 [11/2018 - 08/2020] , or refer to PROCEDURE - Step 43 [08/2020 - ]
INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
Refer to PROCEDURE - Step 48 [11/2018 - 08/2020] , or refer to PROCEDURE - Step 48 [08/2020 - ]
INSTALL FRONT DOOR ASSIST GRIP COVER LH
Refer to PROCEDURE - Step 50 [11/2018 - 08/2020] , or refer to PROCEDURE - Step 50 [08/2020 - ]
INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH
Refer to PROCEDURE - Step 51 [11/2018 - 08/2020] , or refer to PROCEDURE - Step 51 [08/2020 - ]
INSPECT FRONT SEAT ASSEMBLY
1. for HV Model:
  Refer to OPERATION CHECK [11/2018 - 12/2021] , or refer to OPERATION CHECK [12/2021 - ]
2. for Gasoline Model:
  Refer to OPERATION CHECK [11/2018 - 12/2021] , or refer to OPERATION CHECK [12/2021 - ]