LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Prius Prime XLE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock System - Service Information >> Back Door Lock >> Removal [09/2016 - ] >> Procedure

Removal [09/2016 - ]: Procedure

  1. REMOVE DOOR PULL HANDLE 

    Refer to PROCEDURE - Step 2 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 2 [05/2019 - 07/2020] , or refer to PROCEDURE - Step 4 [07/2020 - ]

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY 

    Refer to PROCEDURE - Step 3 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 3 [05/2019 - 07/2020] , or refer to PROCEDURE - Step 5 [07/2020 - ]

  3. REMOVE BACK DOOR LOCK COVER 

    Refer to PROCEDURE - Step 4 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 4 [05/2019 - 07/2020] , or refer to PROCEDURE - Step 6 [07/2020 - ]

  4. REMOVE BACK DOOR LOCK ASSEMBLY 
    1. Disconnect the connector.
      GTY720058Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a T30 "TORX" socket wrench, remove the 2 screws, 2 collars and back door lock assembly.
      GTY720052Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals