Caution / Notice / Hint

NOTE:

The lighting system uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the lighting system after confirming that the communication systems are functioning properly.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2016 - 07/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2020 - ]
If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information the No. 1 headlight ECU sub-assembly LH.
Refer to INITIALIZATION [09/2016 - ]