DTC B150A: Lost Communication with HMI-LAN [08/2016 - 08/2019]: Description

The combination meter assembly (meter circuit plate) receives text data signals from the navigation receiver assembly via local bus communication.

Based on these signals, audio and visual system or navigation system information is displayed on the multi-information display.

This DTC is stored when the combination meter assembly (meter circuit plate) cannot receive the signal.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory	Note
B150A	Lost Communication with HMI-LAN	Diagnosis Condition: A registration information signal was received from the Navigation receiver assembly when ACC power source voltage was received by the Navigation receiver assembly. The power switch is on (IG). IG power source voltage is 9.5 V or more. Malfunction Status: The registration information signal is not received from the Navigation receiver assembly. Malfunction Time: 30 seconds or more	Harness or connector Navigation receiver assembly Combination meter assembly (Meter circuit plate)	DTC stored	for Navigation Receiver Type

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

Note

B150A

Lost Communication with HMI-LAN

Diagnosis Condition:

A registration information signal was received from the Navigation receiver assembly when ACC power source voltage was received by the Navigation receiver assembly.
The power switch is on (IG).
IG power source voltage is 9.5 V or more.

Malfunction Status:

The registration information signal is not received from the Navigation receiver assembly.

Malfunction Time:

DTC stored

for Navigation Receiver Type