Installation [04/2018 - ]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL AUXILIARY BATTERY

Install the auxiliary battery.

Install the No. 3 battery clamp with the bolt.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

Torque: 16.5 N*m (168 kgf*cm, 12 ft.*lbf)

Connect the battery hose to the auxiliary battery.
NOTE:
- Do not twist the battery hose.
- Push the battery hose onto the auxiliary battery until a click sound is heard.
Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
Engage the 2 claws to close the battery terminal connector cover.

CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
1. Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  NOTE:
  When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
  
  Refer to INITIALIZATION [04/2018 - 08/2020] , or refer to INITIALIZATION [08/2020 - 08/2021] , or refer to INITIALIZATION [08/2021 - ]
INSTALL LUGGAGE TRIM SERVICE HOLE COVER
1. Engage the 2 claws and install the luggage trim service hole cover.