Installation [12/2023 - ]: Procedure

Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Install the FC control ECU with the 2 nuts.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

      NOTE:

      If the FC control ECU is dropped or subjected to a strong impact, replace it with a new one.

   2. Connect the 2 FC control ECU connectors and lock with the lever.
      NOTE:

      • When connecting connectors, make sure that foreign substances such as mud or water droplets do not adhere to them.
      • Securely lock with the lever.

Refer to PROCEDURE - Step 178

Refer to INSTALLATION [12/2022 - ]

HINT: 

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [12/2023 - ]